Price list and Terms of delivery for metrological services

 

Price list and Terms of delivery for metrological services

 
 

Valid from January 15, 2008

General terms:

  1. 1. The price list is valid for metrological services provided by MSP-GLOBAL s.r.o. laboratory. The calibrations are performed utilizing the § 5 paragraph 6 of the law no. 505/1990 Sb., as amended by the law 137/2002 Sb. on metrology, or on the basis of the Certificate of Accreditation issued by Czech Accreditation Institute.
  2. 2. VAT is not included in the prices listed.

Terms of delivery:

  1. 1. The apparatuses to be calibrated should be sent in complete, including accessories. It is necessary to attach technical documentation to some less common gauges.
  2. 2. Gauges that require batteries of a common type should be supplied without batteries.
  3. 3. Only cleaned gauges can be accepted for calibration.
  4. 4. Create a list of the gauges to be calibrated.
  5. 5. Our personnel may dismount the gauges for a given fee.
  6. 6. State it in your order if you wish to mark your equipment with a label containing the calibration validity period.
  7. 7. Send your orders to our E-mail: objednavky@msp-global.cz  or our residence address.

Obligations arising from the accreditation (within the accredited fields of pressure, temperature, weight):

Abridgement from the ČSN 17025 standard and from accreditation methodological guidelines.

Laboratory accreditation or any of its check protocols does by no means represent an approval of a product by the authority granting the accreditation or any other authority.

If the authority granting the accreditation considers such use to be confusing, neither the check protocol nor any of its parts may be used by the customer for promotional or publication purposes. Under no circumstances may the protocol be reproduced in other way than complete without a written consent of both the accreditation body and the laboratory.

The customer is required, when referring to the services provided by the accredited calibration laboratory, to use the following or similar sentence:

“Calibrated by the ‘Czech calibration service’ MSP-GLOBAL s.r.o. which is accredited by the Czech Accreditation Institute.”

Calibration sheets:

Unless explicitly requested by the customer, the calibration sheet issued by the calibration laboratory do not contain the calibration validity period.

By course of law the calibration sheet may not contain any recommendations as for intervals between calibrations.

The calibration sheet may contain a statement of conformity in connection with the metrological aspects of the specification (conformity with the national or international standard or with a document approved by the accreditation authority: complying/not complying according to …).

Henceforth, the calibration validity period must be set by the user of the measuring equipment as by course of the law 119/2000 Sb. on metrology.

The methodology for determining the calibration period is well described in the ČSN ISO 10012 standard.

Calibration marks:

Due to above stated reasons the laboratory will label the measuring equipment with calibration mark stating the date of calibration. If the customer applies in writing for a specific calibration period, the calibration validity may be stated on a label as well.

1. LENGTH
1.1. Caliper – up to 250 mm CZK 120
1.2. 2 Caliper – 250 mm to 500 mm CZK 140
1.3. Caliper – 500 mm to 1000 mm CZK 190
1.4. Micrometer – up to 200 mm CZK 140
1.5. Micrometer – more than 200 mm CZK 190
1.6. Dial indicator CZK 140
1.7. End gauge – up to 100 mm CZK 70
1.8. Depth gauge – both micrometer and sliding CZK 140
1.9. Set square, protractor CZK 140
1.10. Passametr CZK 140
1.11. Micrometer bar gauge CZK 140
1.12. Inside caliper CZK 140
1.13. Cylindrical gauge CZK 70
1.14. Bar gauge (flat) CZK 140
1.15. Snap gauge CZK 140
1.16. Steel tape rule (2 m) CZK 65
1.17. Steel tape rule (3 m CZK 72
1.18. Steel tape rule (5 m) CZK 95
1.19. Steel ruler – up to 1 m CZK 120
1.20. Steel ruler – up to 2 m CZK 140
1.21. Height gauge – up to 600 mm CZK 190
1.22. Subito CZK 140
1.23. Feeler gauges – 10 pcs CZK 120
1.24. Feeler gauges – 20 pcs CZK 190
1.25. Thickness gauge with dial indicator CZK 140
1.26. Calibration steel ruler 30 m CZK 290
1.27. Three-point mikrometer up to 100 mm CZK 190
1.28. Other items/td>
By agreement
2. PRESSURE – excess pressure 0-60 MPa
2.1. Mechanical pressure gauge – precision class 2.5% – 4% CZK 260*
2.2. Mechanical pressure gauge – precision class 1.0% – 1.6% CZK 340*
2.3. Mechanical pressure gauge – precision class 0.4% – 0.6% CZK 750*
2.4. Pressure converter – output signal up to 0.1% CZK 850*
2.5. Pressure switch – precision class 0.4% – 1.6% CZK 550
2.6. Pressure switch – precision class 2.5% – 4% CZK 260
2.7. Digital pressure gauge – precision 1% – 4% CZK 340
2.8. Digital pressure gauge – precision 0.1% – 0.5% CZK 650
3. TEMPERATURE from -10 to +900 °C
3.1. Resistance thermometer Pt 100 (up to 400 °C) CZK 900*
3.2. Every additional pair on one sensor CZK 480*
3.3. Electric thermocouples (up to 1200 °C) CZK 1010*
3.4. Every additional pair on one sensor CZK 520*
3.5. Packaging thermometer (glass) CZK 320
3.6. Bimetallic thermometer, thermal switch CZK 440
3.7. Digital thermometer – precision above +/- 0.5 °C (resolution 1 °C)
thermometer with a fixed sensor CZK 460*
hermometer with a removable sensor as a part of a digital thermometer CZK 560*
every additional sensor of a digital thermometer CZK 400*
3.8. Digital thermometer – precision above +/- 0.5 °C (resolution 0.1 °C)
thermometer with a fixed sensor CZK 560*
thermometer with a removable sensor as a part of a digital thermometer CZK 660*
every additional sensor of a digital thermometer CZK 500*
3.9. Digital thermometer – precision between +/- 0.3 °C and +/- 0.5 °C (resolution 0,1 °C)
thermometer with a fixed sensor CZK 1380 *
thermometer with a removable sensor as a part of a digital thermometer CZK 1500 *
every additional sensor of a digital thermometer CZK 900 *
3.10.
Converter – temperature over 1% to unified signal
(e.g. 4 – 20 mA)
CZK 540 *
3.11. Converter – temperature by 1% to unified signal (e.g. 4 – 20 mA) CZK 640 *
3.12. Laboratory oven or drying oven, cooling device CZK 1010 *
3.13. Capillary thermometer CZK 440
3.14. Digital temperature display device 1 oC CZK 420 *
3.15.
Digital temperature display device 0,1 oC CZK 520 *
4. ELECTRICAL QUANTITIES
4.1. Single range measuring instrument (voltmeter, ammeter, etc.) CZK 460
4.2. Universal analog multimeter CZK 860
4.3. Universal analog multimeter displaying 3 1/2 digits CZK 860
4.4. Universal analog multimeter displaying 4 1/2 digits CZK 1010
4.5. Clip-on voltmeter/ammeter CZK 420
4.6. Resistance decade CZK 1200
4.7. Resistance – single range CZK 260
5. WEIGHT (accredited on-site up to 100 kg)
5.1. Laboratory scales (tare function up to 5000 g) CZK 340 *
5.2. Laboratory scales (up to 100 kg) CZK 460 *
5.3. Laboratory scales (up to 700 kg) CZK 3500
6. OTHER
6.1. Hygrometer CZK 490
6.2. Stopwatch CZK 390
6.3. Ford viscosity cup CZK 230
6.4. pH meter CZK 620
6.5. Conductometer CZK 620
6.6. Electronic converter for induction flowmeter CZK 960
7. QUANTITY DISCOUNTS
7.1. Calibration of more than 30 pcs of the same kind -10%
8. SURCHARGES
8.1. Working during weekends and state holidays +20%
8.2. Working in the afternoon (after 2 pm) +15%
8.3. Performing calibration on the customer’s site acc. to EAL R-3 +20%
8.4. Priority calibration within 24 hrs (upon preliminary arrangement) +50%
9. CALIBRATION SHEETS
9.1. Calibration sheet with uncertainty and conformity assessment for field 1 – length CZK 30
9.2. Calibration sheet with a table of measured values and uncertainty calculation CZK 60
9.3. Calibration sheet – accredited CZK 150
10. OTHER SERVICES
10.1. Measuring equipment register (marking and creating of the item registration record) CZK 120/pc
10.3. Measuring loop confirmation (unified signals) CZK 290
10.4. Consultancy, documentation, methodology creation CZK 680/hr
10.5. Value adjusting, gauge needle adjustment, zero connection CZK 680/hr
10.6. Participating and assistance during audits from CZK 5000
10.7. Creation of documents, calibration methodologies and metrological regulations from CZK 3000
10.8. Transport CZK 9.5/km

Items denoted with * can upon request be accreditedly performed on the customer’s site.